Power Trim Seal Kit

Replaces: 87399A2

ALPHA ONE

Replaces: 32-864589

(ram lenght 26 cm.)

For front anchor pin on early Mercruisers with small rubber bushings

MC1 120-260

Replaces: 88035

TR/ TRS/ R/ MR/ ALPHA ONE

Ø exterior 52,8 mm

Starboard

Cylinder tube lenght 15-9/16" (395 mm.)

Replaces: 98704A3

R/ MR/ ALPHA ONE

Replaces: 77442A1

MC-1 1970-1980

Port

Replaces: 98703A26

BRAVO I/ II/ III & X/ XR/XZ

Port

Cylinder Tube Lenght 15-9/16" (395 mm.)

Replaces: 98703A3

R/ MR/ ALPHA ONE

For: 120/ 140/ 160/ 165/ 888/ 898/ 228/ 225-S/ 233/ 250/ 260/ 470/ 485

Replaces: 14698T, 806191T

Ø exterior 48 mm

Alpha One/ Gene II/ Bravo

Replaces: Mercruiser: 23-90203, 61291, 90203; Bombardier: 0508710

Weight: 0.11 kg.

Dimensions: 1.75 cm × 7.13 × 6cm

(ram lenght 19 cm.)

For rear anchor pin on early Mercruisers with small rubber bushings

MC 120-260

Starboard

Replaces: 98704A26

BRAVO I/ II/ III & X/ XR/ XZ

Replaces: 32-864588

Trim Cylinder Hose for a Mercruiser Sterndrive. It goes from the Trim Cylinder to the Connector Block on the Port Side, and is for Pressure down. It fits these models; R, MR, Alpha I & Bravo I, II, III, X, XR, & XZ with cylinder number 98703.

• Replaces: Mercruiser Inboard/Outboard
• Connector to bottom of trim cylinder MCM 120-260 & BRAVO
• 14" cable sleeve
• 1/8" fittings

Replaces: Mercruiser: 828708, 828708T, 8782654A2, 878265A1, 878265A4, 878405A1, 878407A1, 8M0031551

Engines: 135, 150XR6, 175, 200, 225, 250 (EFI), 250 (DFI), 300X (3.0L EFI), MAGNUM III, 105 JET, 140 JET

late model V6

Replaces: 87399A2

ALPHA ONE

Replaces: 32-864589

(ram lenght 26 cm.)

For front anchor pin on early Mercruisers with small rubber bushings

MC1 120-260

Replaces: 88035

TR/ TRS/ R/ MR/ ALPHA ONE

Ø exterior 52,8 mm

Starboard

Cylinder tube lenght 15-9/16" (395 mm.)

Replaces: 98704A3

R/ MR/ ALPHA ONE